# Build 5.0.2811.2017

122. Default Trim Speed can be set in Profiler/Settings/ via Stepper Motor Working Speed. Range 1 - 31.

121. WX-RADAR Version 2 support.
== ADDED ==

120. TQ trim wheels locked on the ground after landing.
== FIXED ==

# Build 5.0.0109.2017

119. Bug in processing Offsets. (ATC Mode C and STBY on IVAO)
== FIXED ==

118. TQ trim wheels locked on the ground.
== FIXED ==

117. LDG ELEV BUG.
== FIXED ==

# Build 5.0.2505.2017

116. LDG ELEV, new function for non switch potentiometer. Need to be calibrated correctly to get it to work.
== ADDED ==

115. WX-RADAR Dimmer.
== ADDED ==

114. Stepper Working Speed
== ADDED ==

# Build 5.0.1705.2017

113. WX RADAR GAIN, missing auto position.
== FIXED ==

# Build 5.0.1704.2017

112. Wrong HFx POT OFF EVENT for all ACP's causing HF knob led's always ON.

111. WX RADAR TILT fixed to allow negative values
== FIXED ==

110. Updated WX RADAR for B47 Jlfmgs compatibility.

109. Changes in ATHR TAKEOVER definitions
- "[PEDESTAL][TQ] - ATHR TAKEOVER" - REMOVED

- "[PEDESTAL][TQ] ATHR TAKEOVER UP"; - ADDED
- "[PEDESTAL][TQ] ATHR TAKEOVER DOWN"; - ADDED

# Build 5.0.1403.2017

108. Random decimal point issue in BARO display
== FIXED ==

107. Missing MACH decimal point
== FIXED ==

106. New FUNCTION added for OVHD hardware, where there is no mechanical switch for LDG ELEV adjustment.
- "[OVHD][CABIN PRESSURE] LANDING ELEV ANALOG 1"

105. Not working LDG ELEV
== FIXED ==

104. Added FUNCTIONS for WXRADAR device.
- "[WX RADAR] SYS 1";
- "[WX RADAR] SYS 2";
- "[WX RADAR] SYS OFF";

- "[WX RADAR] PWS OFF";
- "[WX RADAR] PWS AUTO";

- "[WX RADAR] MULTISCAN MAN";
- "[WX RADAR] MULTISCAN AUTO";

- "[WX RADAR] GCS OFF";
- "[WX RADAR] GCS AUTO";

- "[WX RADAR] WX";
- "[WX RADAR] WX + T";
- "[WX RADAR] TURB";
- "[WX RADAR] WX MAP";

- "[WX RADAR] GAIN";
- "[WX RADAR] TILT";


103. Added FUNCTIONS for DCDU device.
DCDU CS FUNCTIONS
- "[DCDU CS] BRT DOWN";
- "[DCDU CS] BRT UP";
- "[DCDU CS] DIM DOWN";
- "[DCDU CS] DIM UP";

- "[DCDU CS] MSG MINUS DOWN";
- "[DCDU CS] MSG MINUS UP";
- "[DCDU CS] MSG PLUS DOWN";
- "[DCDU CS] MSG PLUS UP";

- "[DCDU CS] LSK 1L DOWN";
- "[DCDU CS] LSK 1L UP";
- "[DCDU CS] LSK 2L DOWN";
- "[DCDU CS] LSK 2L UP";

- "[DCDU CS] PRINT DOWN";
- "[DCDU CS] PRINT UP";

- "[DCDU CS] PGE MINUS DOWN";
- "[DCDU CS] PGE MINUS UP";
- "[DCDU CS] PGE PLUS DOWN";
- "[DCDU CS] PGE PLUS UP";

- "[DCDU CS] LSK 1R DOWN";
- "[DCDU CS] LSK 1R UP";
- "[DCDU CS] LSK 2R DOWN";
- "[DCDU CS] LSK 2R UP";

DCDU FO FUNCTIONS
- "[DCDU FO] BRT DOWN";
- "[DCDU FO] BRT UP";
- "[DCDU FO] DIM DOWN";
- "[DCDU FO] DIM UP";

- "[DCDU FO] MSG MINUS DOWN";
- "[DCDU FO] MSG MINUS UP";
- "[DCDU FO] MSG PLUS DOWN";
- "[DCDU FO] MSG PLUS UP";

- "[DCDU FO] LSK 1L DOWN";
- "[DCDU FO] LSK 1L UP";
- "[DCDU FO] LSK 2L DOWN";
- "[DCDU FO] LSK 2L UP";

- "[DCDU FO] PRINT DOWN";
- "[DCDU FO] PRINT UP";

- "[DCDU FO] PGE MINUS DOWN";
- "[DCDU FO] PGE MINUS UP";
- "[DCDU FO] PGE PLUS DOWN";
- "[DCDU FO] PGE PLUS UP";

- "[DCDU FO] LSK 1R DOWN";
- "[DCDU FO] LSK 1R UP";
- "[DCDU FO] LSK 2R DOWN";
- "[DCDU FO] LSK 2R UP";


102. Wrong EVENT for FCU APPR led
== FIXED ==

# Build 5.0.1212.2016

101. Added EVENTS and FUNCTIONS for CLOCK device.

100. Changed events names:
- "[OVHD][CABIN PRESSURE] LANDINGD ELEV AUTO OFF" --> "[OVHD][CABIN PRESSURE] LANDING ELEV AUTO OFF"

99. Changed events names:
- "[OVHD][PUSHBACK] TAIL LEFT [ON] ON" --> "[PUSHBACK] TAIL LEFT [ON] ON";
- "[OVHD][PUSHBACK] TAIL LEFT [ON] OFF" --> "[PUSHBACK] TAIL LEFT [ON] OFF";
- "[OVHD][PUSHBACK] TAIL LEFT [FAULT] ON" --> "[PUSHBACK] TAIL LEFT [FAULT] ON";
- "[OVHD][PUSHBACK] TAIL LEFT [FAULT] OFF" --> "[PUSHBACK] TAIL LEFT [FAULT] OFF";

- "[OVHD][PUSHBACK] TAIL RIGHT [ON] ON" --> "[PUSHBACK] TAIL RIGHT [ON] ON";
- "[OVHD][PUSHBACK] TAIL RIGHT [ON] OFF" --> "[PUSHBACK] TAIL RIGHT [ON] OFF";
- "[OVHD][PUSHBACK] TAIL RIGHT [FAULT] ON" --> "[PUSHBACK] TAIL RIGHT [FAULT] ON";
- "[OVHD][PUSHBACK] TAIL RIGHT [FAULT] OFF" --> "[PUSHBACK] TAIL RIGHT [FAULT] OFF";

- "[OVHD][PUSHBACK] STRAIGHT BACK [ON] ON" --> "[PUSHBACK] STRAIGHT BACK [ON] ON";
- "[OVHD][PUSHBACK] STRAIGHT BACK [ON] OFF" --> "[PUSHBACK] STRAIGHT BACK [ON] OFF";
- "[OVHD][PUSHBACK] STRAIGHT BACK [FAULT] ON" --> "[PUSHBACK] STRAIGHT BACK [FAULT] ON";
- "[OVHD][PUSHBACK] STRAIGHT BACK [FAULT] OFF" --> "[PUSHBACK] STRAIGHT BACK [FAULT] OFF";

- "[OVHD][PUSHBACK] STOP [STOP] ON" --> "[PUSHBACK] STOP [STOP] ON";
- "[OVHD][PUSHBACK] STOP [STOP] OFF" --> "[PUSHBACK] STOP [STOP] OFF";
- "[OVHD][PUSHBACK] STOP [FAULT] ON" --> "[PUSHBACK] STOP [FAULT] ON";
- "[OVHD][PUSHBACK] STOP [FAULT] OFF" --> "[PUSHBACK] STOP [FAULT] OFF";

- "[OVHD][REFUEL] FUEL PRESELECTED DISPLAY" --> "[REFUEL] FUEL PRESELECTED DISPLAY";
- "[OVHD][REFUEL] FUEL ACTUAL DISPLAY" --> "[REFUEL] FUEL ACTUAL DISPLAY";
- "[OVHD][REFUEL] PWR [FAULT] ON" --> "[REFUEL] PWR [FAULT] ON";
- "[OVHD][REFUEL] PWR [FAULT] OFF" --> "[REFUEL] PWR [FAULT] OFF";
- "[OVHD][REFUEL] PWR [ON] ON" --> "[REFUEL] PWR [ON] ON";
- "[OVHD][REFUEL] PWR [ON] OFF" --> "[REFUEL] PWR [ON] OFF";

- "[OVHD][REFUEL] START [FAULT] ON" --> "[REFUEL] START [FAULT] ON";
- "[OVHD][REFUEL] START [FAULT] OFF" --> "[REFUEL] START [FAULT] OFF";
- "[OVHD][REFUEL] START [ON] ON" --> "[REFUEL] START [ON] ON";
- "[OVHD][REFUEL] START [ON] OFF" --> "[REFUEL] START [ON] OFF";

- "[OVHD][REFUEL] CKPT Light ON" --> "[REFUEL] CKPT Light ON";
- "[OVHD][REFUEL] CKPT Light OFF" --> "[REFUEL] CKPT Light OFF";
- "[OVHD][REFUEL] END Light ON" --> "[REFUEL] END Light ON";
- "[OVHD][REFUEL] END Light OFF" --> "[REFUEL] END Light OFF";

98. Changed function names:
- "[OVHD][REFUEL] POWER ON"; --> "[REFUEL] POWER ON";
- "[OVHD][REFUEL] POWER OFF" --> "[REFUEL] POWER OFF";

- "[OVHD][REFUEL] REFUEL START" --> "[REFUEL] REFUEL START";
- "[OVHD][REFUEL] REFUEL STOP" --> "[REFUEL] REFUEL STOP";
- "[OVHD][REFUEL] PRESELECTED INCREASE ON" --> "[REFUEL] PRESELECTED INCREASE ON";
- "[OVHD][REFUEL] PRESELECTED INCREASE OFF" --> "[REFUEL] PRESELECTED INCREASE OFF";

- "[OVHD][REFUEL] PRESELECTED DECREASE ON" --> "[REFUEL] PRESELECTED DECREASE ON";
- "[OVHD][REFUEL] PRESELECTED DECREASE OFF" --> "[REFUEL] PRESELECTED DECREASE OFF";

- "[OVHD][PUSHBACK] TAIL LEFT" --> "[PUSHBACK] TAIL LEFT";
- "[OVHD][PUSHBACK] TAIL RIGHT" --> "[PUSHBACK] TAIL RIGHT";
- "[OVHD][PUSHBACK] STRAIGHT BACK" --> "[PUSHBACK] STRAIGHT BACK";
- "[OVHD][PUSHBACK] STOP" --> "[PUSHBACK] STOP";


97. Wrong event names:
- "[PEDESTAL][ACP1] ON VOICE VOICE ON" -->"[PEDESTAL][ACP1] ON VOICE VOICE ON"
- "[PEDESTAL][ACP1] ON VOICE ON" --> "[PEDESTAL][ACP1] ON VOICE DASH ON",
- "[PEDESTAL][ACP1] ON VOICE OFF" --> "[PEDESTAL][ACP1] ON VOICE DASH OFF",

- "[PEDESATL][ACP2] ON VOICE VOICE ON" -->"[PEDESATL][ACP2] ON VOICE VOICE ON"
- "[PEDESTAL][ACP2] ON VOICE ON" --> "[PEDESTAL][ACP2] ON VOICE DASH ON",
- "[PEDESTAL][ACP2] ON VOICE OFF" --> "[PEDESTAL][ACP2] ON VOICE DASH OFF",

- "[OVHD][ACP3] ON VOICE VOICE ON" --> "[OVHD][ACP3] ON VOICE VOICE ON"
- "[OVHD][ACP3] ON VOICE ON" --> "[OVHD][ACP3] ON VOICE DASH ON",
- "[OVHD][ACP3] ON VOICE OFF" --> "[OVHD][ACP3] ON VOICE DASH OFF",
== FIXED ==

96. Led for HF1 had wrong event for OFF action defined in default Profile. Affected ACP1, ACP, ACP3
== FIXED ==

95. INT/RAD selector BUG in ACP panel fixed and added new event names
- "[PEDESTAL][ACP1] INT/RAD SELECTOR RAD POSITION";
- "[PEDESTAL][ACP1] INT/RAD SELECTOR INT POSITION";
- "[PEDESTAL][ACP1] INT/RAD SELECTOR NEUTRAL POSITION";

- "[PEDESTAL][ACP2] INT/RAD SELECTOR RAD POSITION";
- "[PEDESTAL][ACP2] INT/RAD SELECTOR INT POSITION";
- "[PEDESTAL][ACP2] INT/RAD SELECTOR NEUTRAL POSITION";

- "[OVHD][ACP3] INT/RAD SELECTOR RAD POSITION";
- "[OVHD][ACP3] INT/RAD SELECTOR INT POSITION";
- "[OVHD][ACP3] INT/RAD SELECTOR NEUTRAL POSITION";
== FIXED ==

# Build 5.0.2911.2016

94. Functions and events for CLOCK
== ADDED ==

93. Logic for REFUEL Panel
== ADDED ==

92. EFIS NAV 1 NAV2 functions reworked
- "[GLARE][EFIS CS] NAV1 ADF ON - Tripple Switch";
- "[GLARE][EFIS CS] NAV1 ADF OFF - Tripple Switch";
- "[GLARE][EFIS CS] NAV1 VOR ON - Tripple Switch";
- "[GLARE][EFIS CS] NAV1 VOR OFF - Tripple Switch";
- "[GLARE][EFIS CS] NAV2 ADF ON - Tripple Switch";
- "[GLARE][EFIS CS] NAV2 ADF OFF - Tripple Switch";
- "[GLARE][EFIS CS] NAV2 VOR ON - Tripple Switch";
- "[GLARE][EFIS CS] NAV2 VOR OFF - Tripple Switch";

91. Servo bug
== FIXED ==

# Build 5.0.1507.2016

90. Added new functions to help handling T on ND LOCKING type switches.
- "[MIP CS] TERRAIN ON ND ON - LOC";
- "[MIP CS] TERRAIN ON ND OFF - LOC";
- "[MIP FO] TERRAIN ON ND ON - LOC";
- "[MIP FO] TERRAIN ON ND OFF - LOC";

89. Change events name due to typo mistake
- "[OVHD][AIR COND] PACK21 [OFF] ON" to "[OVHD][AIR COND] PACK2 [OFF] ON"
- "[OVHD][AIR COND] PACK11 [OFF] ON" to "[OVHD][AIR COND] PACK1 [OFF] ON"

88. Change in Release Numbers coding, last two elements are release date:
- 1507.2016 --> 15:DAY, 07:MONTH, 2016:YEAR

# Build 5.0.1183.1000

87. Remaining Events for Push Back Panel.
- "[CUSTOM] PUSHBACK TAIL LEFT [ON] ON";
- "[CUSTOM] PUSHBACK TAIL LEFT [ON] OFF";
- "[CUSTOM] PUSHBACK TAIL LEFT [FAULT] ON";
- "[CUSTOM] PUSHBACK TAIL LEFT [FAULT] OFF";

- "[CUSTOM] PUSHBACK TAIL RIGHT [ON] ON";
- "[CUSTOM] PUSHBACK TAIL RIGHT [ON] OFF";
- "[CUSTOM] PUSHBACK TAIL RIGHT [FAULT] ON";
- "[CUSTOM] PUSHBACK TAIL RIGHT [FAULT] OFF";

- "[CUSTOM] PUSHBACK STRAIGHT BACK [ON] ON";
- "[CUSTOM] PUSHBACK STRAIGHT BACK [ON] OFF";
- "[CUSTOM] PUSHBACK STRAIGHT BACK [FAULT] ON";
- "[CUSTOM] PUSHBACK STRAIGHT BACK [FAULT] OFF";

- "[CUSTOM] PUSHBACK STOP [STOP] ON";
- "[CUSTOM] PUSHBACK STOP [STOP] OFF";
- "[CUSTOM] PUSHBACK STOP [FAULT] ON";
- "[CUSTOM] PUSHBACK STOP [FAULT] OFF";
== ADDED ==

86. Cabin Pressure switch for AUTO mode added.
- "[OVHD][CABIN PRESSURE] LANDING ELEV AUTO ON";
- "[OVHD][CABIN PRESSURE] LANDINDG ELEV AUTO OFF";
== ADDED ==

84. Option for disabling Automatic Elevator Trim can be activated in Settings/TQ section.
== ADDED ==

83. Missing EMER EXIT LIGHT Led
== ADDED ==

82. Push Back Panel logic.
== ADDED ==

81. Option for disabling Automatic Trim in case of issues.
== ADDED ==

# Build 5.0.1097.1000

80. Added new functions.
"[CUSTOM] EXT PWR CONNECT";
"[CUSTOM] EXT PWR DISCONNECT";
"[CUSTOM] GND HP CONNECT";
"[CUSTOM] GND HP DISCONNECT";
==ADDED==

79. Changed names of events and functions.
==FIXED==

# Build 3121.1000

78. Wrong time sent to Clock --> Local instead UTC.
==FIXED==

# Build 3035.1000

Software is supplied as a zipped package. Only what user needs to do is unpack file to any location without installation. Main folder is called SKALARKI_SOFTWARE and his name shouldn't be changed as well as sub folders structure.

66. Added events for Sim state PAUSED/UNPAUSED Led's
- "[CUSTOM] SIM PAUSED"
- "[CUSTOM] SIM UNPAUSED"

67. Added events for PUSH BACK Led's
- "[CUSTOM] PUSHBACK TAIL LEFT [ON] ON";
- "[CUSTOM] PUSHBACK TAIL LEFT [ON] OFF";
- "[CUSTOM] PUSHBACK TAIL RIGHT [ON] ON";
- "[CUSTOM] PUSHBACK TAIL RIGHT [ON] OFF";
- "[CUSTOM] PUSHBACK STRAIGHT BACK [ON] ON";
- "[CUSTOM] PUSHBACK STRAIGHT BACK [ON] OFF";
- "[CUSTOM] PUSHBACK STOP [STOP] ON";
- "[CUSTOM] PUSHBACK STOP [STOP] OFF";

68. Bug EXT PWR led's related
== FIXED ==

69. Bug in updating UTC time logic.
Now time should synchronize every time when Profile is started as well as every time Airport and time zone is changed.
== FIXED ==

# Build 3065.1000

70. Added functions for AFT AUDIO SWITCHING
- "[OVHD][AFT] AUDIO SWITCHING CPT 3";
- "[OVHD][AFT] AUDIO SWITCHING FO 3";
- "[OVHD][AFT] AUDIO SWITCHING NORM";

71. Added functions for DOME SWITCH
- "[OVHD LIGHTS] DOME LIGHT BRT";
- "[OVHD LIGHTS] DOME LIGHT DIM";
- "[OVHD LIGHTS] DOME LIGHT OFF";

and events
- "[OVHD LIGHTS] - DOME LIGHT BRT";
- "[OVHD LIGHTS] - DOME LIGHT DIM";
- "[OVHD LIGHTS] - DOME LIGHT OFF";

These might be used for driving external hardware to control cockpit Dome lights

# Build 3075.1000

72. Improved displays driving due to SDK changes

73. Fixed bug in X FEED [OPEN] led.

# Build 3095.1000

74. Added more custom key presses
- "[CUSTOM] SEND KEY - A";
- "[CUSTOM] SEND KEY - B";
- "[CUSTOM] SEND KEY - C";
- "[CUSTOM] SEND KEY - D";
- "[CUSTOM] SEND KEY - E";
- "[CUSTOM] SEND KEY - F";
- "[CUSTOM] SEND KEY - G";
- "[CUSTOM] SEND KEY - H";
- "[CUSTOM] SEND KEY - I";
- "[CUSTOM] SEND KEY - J";
- "[CUSTOM] SEND KEY - K";
- "[CUSTOM] SEND KEY - L";
- "[CUSTOM] SEND KEY - M";
- "[CUSTOM] SEND KEY - N";
- "[CUSTOM] SEND KEY - O";
- "[CUSTOM] SEND KEY - P";
- "[CUSTOM] SEND KEY - Q";
- "[CUSTOM] SEND KEY - R";
- "[CUSTOM] SEND KEY - S";
- "[CUSTOM] SEND KEY - T";
- "[CUSTOM] SEND KEY - U";
- "[CUSTOM] SEND KEY - V";
- "[CUSTOM] SEND KEY - W";
- "[CUSTOM] SEND KEY - X";
- "[CUSTOM] SEND KEY - Y";
- "[CUSTOM] SEND KEY - Z";

# Build 3105.1000

75. Changed/Added UP/DOWN states to ECAM buttons
- "[PEDESTAL] - ECAM TO CONFIG DOWN";
- "[PEDESTAL] - ECAM TO CONFIG UP";
- "[PEDESTAL] - ECAM EMER CANC DOWN";
- "[PEDESTAL] - ECAM EMER CANC UP";
- "[PEDESTAL] - ECAM ENG DOWN";
- "[PEDESTAL] - ECAM ENG UP";
- "[PEDESTAL] - ECAM BLEED DOWN";
- "[PEDESTAL] - ECAM BLEED UP";
- "[PEDESTAL] - ECAM CAB PRESS DOWN";
- "[PEDESTAL] - ECAM CAB PRESS UP";
- "[PEDESTAL] - ECAM ELEC DOWN";
- "[PEDESTAL] - ECAM ELEC UP";
- "[PEDESTAL] - ECAM HYD DOWN";
- "[PEDESTAL] - ECAM HYD UP";
- "[PEDESTAL] - ECAM FUEL DOWN";
- "[PEDESTAL] - ECAM FUEL UP";
- "[PEDESTAL] - ECAM APU DOWN";
- "[PEDESTAL] - ECAM APU UP";
- "[PEDESTAL] - ECAM COND DOWN";
- "[PEDESTAL] - ECAM COND UP";
- "[PEDESTAL] - ECAM DOOR DOWN";
- "[PEDESTAL] - ECAM DOOR UP";
- "[PEDESTAL] - ECAM WHEEL DOWN";
- "[PEDESTAL] - ECAM WHEEL UP";
- "[PEDESTAL] - ECAM F/CTL DOWN";
- "[PEDESTAL] - ECAM F/CTL UP";
- "[PEDESTAL] - ECAM ALL DOWN";
- "[PEDESTAL] - ECAM ALL UP";
- "[PEDESTAL] - ECAM CLR DOWN";
- "[PEDESTAL] - ECAM CLR UP";
- "[PEDESTAL] - ECAM STS DOWN";
- "[PEDESTAL] - ECAM STS UP";
- "[PEDESTAL] - ECAM RCL DOWN";
- "[PEDESTAL] - ECAM RCL UP";"

# Build 3106.1000

76. Support for older TQ versions, 2012, 2013
==ADDED==

77. Added functions for Tillers
- "TILLER CS";
- "TILLER FO";

end faq

{accordionfaq faqid=accordion3 active=item1}