SkalarkiIO Profiler is an Application to allow communication between SKALARKI hardware and aircraft or simulation software. All SKALARKI hardware can be used ONLY via SkalarkiIO Profiler and dedicated digitally signed USB driver. Registering SkalarkiIO Profiler is mandatory and it is free of charge for Home Users. Any commercial aplication is allowed only after purchasing related Licence.
ProSim:A320 Support
In this tutorial we will explain how to install SkalarkiIO Profiler to work with ProSim:A320 suite as well how to configure ProSim:A320 to work with SkalarkiIO Profiler. Detailed instalation of ProSim:A320 suite you can find here - [ProSim:A320].
1. After downloading SkalarkiIO Profiler 5.1 run the installer.
2. Click "Next" to move to the next step.
3. Choose ProSim A320 component to install. Click on small blue arrow to open context menu and pick "Will be installed on local hard drive" option.
4. Click "Next" button to move to the next step:
5. In case you want to change default Profiler installation folder, it can be done in "Installation Folder" tab. We strongly recommend to keep Profiler in default location. Once done click "Next".
6. Click "Install" to proceed with installation. Installer will install all elements automatically.
7. When installation is completed press "Finish" button.
8. By default Profiler will start with the Windows and will be minimised to system tray. If you start Profiler manually it will be minnised as well. To bring it back on screen please find Profielr icon in system tray and double click on it or right click on the icon, then choose "Recover" and Profiler will show on screen.
RecoverProfiler
There is no need to add or edit any files manually. Non of the files needs to be moved or copied to p3d folders.
In most of the cases ProSim:A320 is used by full cockpit owners, then all tabs in Settings needs to be reviewed and set accordingly. ProSim:A320 is working in SDK Mode so there is no need to edit or create Profile. For P&P devices and SDK Mode Profiles are not used.
TIP! - Please enable only hardware which exists in the system. If you don't have for example AFT OVHD, then do not enable MAINT Panel.
2.1 General Settings
In this section please select ProSim A320 aircraft then set IP for SKALARKI SDK Server. This should be IP address of the machine where Profieler is installed. For this example let's use IP: 192.168.1.100
For Multi PC configuration, Profiler needs to be installed on every machine, where SKALARKI hardware is connected. Then in Settings we need to enable only connected hardware.
2.2 - Glare Extensions Tab
In this tab please select FCU version you own. If you don't have glare wings please uncheck "Glare Wings".
2.3 - MIP Extensions Tab
Please select all options to match your hardware.
2.4 - Pedestal Extensions Tab
Please select all options to match your hardware.
2.5 - Overhead Extensions Tab
Please select all options to match your hardware.
2.6 - TQ Settings Tab
Please select TQ version to match your hardware.
2.7 - SDK Calibration Tab
There is nothing to set here for ProSim as all calibration is done in ProSimA320 System Config/Configuration/Combined Config/Flight Controls
2.8 - PROLINE Hardware Tab
More Information to Follow.
There is nothing SKALARKI specific during ProSim A320 instalaltion. However in ProSimA320 Systems there is some configuration needed.
